Zkg-2000 Series Zkg-1 SCR Voltage Regulator Control SSR-25DV Module

• Customization: Available
• Task: Adjust
• Structure: Combination
• Model NO.: ZKG-1
• Mathematical Model: Linear
• Signal: Continuous
• Function: Automatic Control, Monitoring, Measurement
• Certification: ISO: 9001, CE
• Condition: New
• Customized: Non-Customized
• Material: Industrial Flame Retardant Plastics
• Overall Dimension(W*L*H): 48*48*90mm
• Opening Size Dimension: 45*45mm
• Voltage: 220VAC±10%
• Frequency: 50/60Hz
• Power Consumption: 3W
• Transport Package: Carton
• Specification: ZKG-1
• Trademark: Aoyi
• Origin: China
• HS Code: 9030390000
• Production Capacity: 10000 Pieces/Year
• Package Size: 55.50cm * 27.50cm * 25.00cm
• Package Gross Weight: 14.000kg

Product Description

Detailed Photos

Product Specifications

Maximum conduction angle of Phase-Shift Trigger		≥170°
Dimension(mm)	Opening size dimension	45*45
	Overall dimension(w*l*h)	48*48*90
Power supply	Voltage	220VAC±10%
	Frequency	50Hz
Power Consumption		3W
Working environment	Working temperature	-10ºC~50ºC
	Relative humidity	≤85% in Non corrosive gas occasion
Radiator		√

Wiring Diagram

1. Terminals: L,N are the input terminals of the operating power supply of the machine. L is the phase line(commonly known as live wire). N is the neutral wire (commonly known as the earth wire).G,T1:the output of the machine triggers pulse signals.T1 is also the input signal of load voltage feedback.
2. External parts: LOAD-load(heating equipment). FU-fuse. T2,T1,G-connect two-way silicon controlled electrode, G-controlled electrode,T2 and T1 are the main electrodes. L,N-outside power supply incoming line, L is the phase line(commonly known as live wire).N is the neutral wire (commonly known as the earth wire)

Warning

1. Connect the meter, module, load, and fuse power supply according to the wiring diagram. The working power must be in common phase(means the same) with the load power, or the voltage regulator will be damaged.
2. Fuse FU must be connected to the input end of phase line and shall not be connected to other positions.
3. The thyristor radiator shall be fully considered to avoid electric shock and short circuit between electrodes of the thyristor.  should be fully protected against electric shock and short circuit with each thyristor electrode when equipped.                                 
4. Every phase trigger signal wire of SSR-DV connected to voltage regulator should very short and separated from other wires in case of triggering the SSR-DV losing control due to mutual interference.
5. The rated current of SSR-DV must be two times more than the actual current, Large enough radiator, good ventilation and heat dissipation are needed to ensure the temperature of SSR-DV is under 70ºC in any occasion.
6. Suitable load: constant resistance type heating wire, IR infrared ray and UV lamp.

Operation

1. Adjust the addend key "∧"or subtracted key "∨"on the panel, "SV" displays setting voltage value, "PV" shows the voltage on the load, press the "P" key to suspended load current .
2. The regulator uses negative voltage feedback, and half-wave power supply is strictly prohibited to the load, so that the direct current on the load may not burn the transformer inside the machine, and the single side conduction of SCR shall be prevented in normal use. It is strictly forbidden to supply half-wave power to the load, so as to prevent the DC power on the load from burning the instrument, and also to prevent the single-sided conduction of the thyristor in normal use.
3. Do not drive inductive loads such as induction furnace and step-down transformer to prevent damaging e to thyristor.      
4. "Safety first" do not touch the exposed metal part of the machine to avoid electrical accident. If the machine is not normal, do not open it randomly, it must be handled by professionals.

Others
The instrument should be stored in a place where is dry, ventilated, non-corrosive gas, and the ambient temperature and relative humidity should meet the technical requirements.

Company Profile

Established in 2007, Shanghai/Huangshan Aoyi Electric Co., Ltd is a manufacturer and trader specialized in the research, production and development of Temperature control electric company. Our products include pointer meters, current and voltage meters, solid state relays, SCR power regulators, voltage regulators and intelligent temperature controller.

We are located in Shanghai, China's trade center, more than 100 outstanding employees. All of our products have obtained CCC, CE and passed ISO9001 international quality standards test. As a result of our excellent products and outstanding customer service, we have established a global sales network reaching China, Southeast Asia, Europe, America and other countries. With the strong support of business cooperation friends around the world like you, Our sales are growing every year, we have achieved sales of tens of millions in 2019, and we will keep it up in the future.

If you are interested in any of our products or would like to place an order, please get free to contact us. We are ready and looking forward to forming successful business relationships with new clients around the world in the near future. Let's achieve success together and take our business one step further

Zhang Qifa, the founder of Shanghai Aoyi Electric Co., Ltd, has been engaged in the temperature control electronics industry for more than 30 years. His business philosophy is quality first, integrity management, scientific and technological innovation, and welcomes friends from outside with excellent products and services.

Factory Introduction

Contact with Us