Aoyi Hnscr-La SCR Power Controllers for Electrical Resistance Heaters

Product Details
Customization: Available
Task: Adjust
Structure: Combination
Shipping & Policy
Shipping Cost: Contact the supplier about freight and estimated delivery time.
Payment Methods:
visa mastercard discover JCB diners club american express T/T
PIX SPEI OXXO PSE OZOW
  Support payments in USD
Secure payments: Every payment you make on Made-in-China.com is protected by the platform.
Refund policy: Claim a refund if your order doesn't ship, is missing, or arrives with product issues.
Manufacturer/Factory & Trading Company

360° Virtual Tour

Secured Trading Service
Diamond Member Since 2016

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

to see all verified strength labels (16)
  • Aoyi Hnscr-La SCR Power Controllers for Electrical Resistance Heaters
  • Aoyi Hnscr-La SCR Power Controllers for Electrical Resistance Heaters
  • Aoyi Hnscr-La SCR Power Controllers for Electrical Resistance Heaters
  • Aoyi Hnscr-La SCR Power Controllers for Electrical Resistance Heaters
  • Aoyi Hnscr-La SCR Power Controllers for Electrical Resistance Heaters
  • Aoyi Hnscr-La SCR Power Controllers for Electrical Resistance Heaters
Find Similar Products
  • Overview
  • Detailed Photos
  • Product Specifications
  • Examples of connecting circuit
  • Dimension
  • Company Profile
  • Factory Introduction
  • Contact with Us
Overview

Basic Info.

Model NO.
HNSCR-LA
Mathematical Model
Linear
Signal
Continuous
Function
Automatic Control, Protection
Certification
ISO: 9001, CE
Condition
New
Customized
Non-Customized
Material
Stainless Steel
Rated Voltage
Three-Phase 380VAC(Three Phase Three Wire)
Rated Current
75A
Output Mode
Phase Output
Control Signal
4-20mA,0-5VDC,0-10VDC(Three Ways to Switch)
Transport Package
Carton
Specification
5 KG
Trademark
Aoyi
Origin
China
HS Code
8537101190
Production Capacity
10000 Pieces/Year

Packaging & Delivery

Package Size
47.00cm * 43.00cm * 36.00cm
Package Gross Weight
10.000kg

Product Description

Detailed Photos

Aoyi Hnscr-La SCR Power Controllers for Electrical Resistance Heaters
Aoyi Hnscr-La SCR Power Controllers for Electrical Resistance HeatersAoyi Hnscr-La SCR Power Controllers for Electrical Resistance HeatersAoyi Hnscr-La SCR Power Controllers for Electrical Resistance HeatersAoyi Hnscr-La SCR Power Controllers for Electrical Resistance HeatersAoyi Hnscr-La SCR Power Controllers for Electrical Resistance HeatersAoyi Hnscr-La SCR Power Controllers for Electrical Resistance HeatersAoyi Hnscr-La SCR Power Controllers for Electrical Resistance HeatersAoyi Hnscr-La SCR Power Controllers for Electrical Resistance HeatersAoyi Hnscr-La SCR Power Controllers for Electrical Resistance Heaters

Product Specifications
Rated Voltage Three-phase 380VAC(three phase three wire)
Rated Current 40A  75A  90A 
Auxiliary power 220VAC 50Hz/60Hz
Output Mode Phase output
Input Mode 4-20mA, 0-5VDC, 0-10VDC, manual VR adjustment (2-10K)
Input Impedance 4-20mA(240Ω),0-5VDC(30K),0-10VDC(12K)
Protective Function Fast fuse, radiator over temperature stop output
Display Function LED panel shows SCR working status and cause of failure
Use Environment Temperature: less than 45ºC,humidity: less than 90%RH
 
Examples of connecting circuit

Aoyi Hnscr-La SCR Power Controllers for Electrical Resistance Heaters

Aoyi Hnscr-La SCR Power Controllers for Electrical Resistance HeatersAoyi Hnscr-La SCR Power Controllers for Electrical Resistance Heaters

Output wave 
Aoyi Hnscr-La SCR Power Controllers for Electrical Resistance HeatersInstallation size
Aoyi Hnscr-La SCR Power Controllers for Electrical Resistance Heaters
Dimension
Model HNSCR- LA
Rated Current 40A  75A  90A
Dimension
(mm)
Image F1
W 140
L 230
H 160
Install dimension (mm) Image F2
W 130
L 170

Warning
1. Three-phase three-wire input is adopted in the main circuit, and there is no phase sequence requirement.
2. applicable load: fixed impedance electric heating wire, IR far infrared, UV lamp, etc.
3. When the load is Y-connected, the center point cannot be connected to the neutral line. Failure to do so will cause the SCR to lose control. If the three-phase load is unbalanced, the center point must be connected to the zero line, and our company's three-phase four-wire system can be selected.
4. SCR is wall-mounted, vertical installation can achieve the best heat dissipation.
5. SCR is a high current product, please be sure to lock the (R, S, T) and (U, V, W) terminals, otherwise it will cause the terminal to heat up and cause the SCR to burn out.
6. SCR built-in fast fuse, as an over current and short circuit protection. When the fuse is blown (yellow light is on), first check the load for short circuit, partial discharge and other fires. After troubleshooting, open the panel to replace it, be sure to replace it with a fuse of the same specification.Please pay attention that do not arbitrarily increase the amperage of the fuse.
7. When the heatsink temperature exceeds 85 °C, the SCR will automatically stop working. Please check if the actual load current has exceeded the scope of this SCR. It is necessary to improve the environment in which the SCR is located and to ventilate it well. After troubleshooting, run the power again.
8. When you want to turn off the load, first disconnect the control signal, make the SCR output zero, and then cut off the main circuit power.
9. When the SCR is idle for three months on the machine, please handle the surface dust and charge it once. Method: Run the machine for more than 5 minutes.
10. Use environment: Please use in an environment with good ventilation, no direct sunlight or heat radiation, no corrosive and no flammability.
Company Profile

Established in 2007, Shanghai/Huangshan Aoyi Electric Co., Ltd is a manufacturer and trader specialized in the research, production and development of Temperature control electric company. Our products include pointer meters, current and voltage meters, solid state relays, SCR power regulators, voltage regulators and intelligent temperature controller.

We are located in Shanghai, China's trade center, more than 100 outstanding employees. All of our products have obtained CCC, CE and passed ISO9001 international quality standards test. As a result of our excellent products and outstanding customer service, we have established a global sales network reaching China, Southeast Asia, Europe, America and other countries. With the strong support of business cooperation friends around the world like you, Our sales are growing every year, we have achieved sales of tens of millions in 2019, and we will keep it up in the future.

If you are interested in any of our products or would like to place an order, please get free to contact us. We are ready and looking forward to forming successful business relationships with new clients around the world in the near future. Let's achieve success together and take our business one step further

Zhang Qifa, the founder of Shanghai Aoyi Electric Co., Ltd, has been engaged in the temperature control electronics industry for more than 30 years. His business philosophy is quality first, integrity management, scientific and technological innovation, and welcomes friends from outside with excellent products and services.

Factory Introduction
Aoyi Hnscr-La SCR Power Controllers for Electrical Resistance Heaters
Aoyi Hnscr-La SCR Power Controllers for Electrical Resistance Heaters
Aoyi Hnscr-La SCR Power Controllers for Electrical Resistance Heaters
Contact with Us
Aoyi Hnscr-La SCR Power Controllers for Electrical Resistance Heaters

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier