Aoyi China Manufacture SCR Voltage Regulator for Computer SSR-60DV

• Customization: Available
• Current Type: AC
• Phase: Single Phase
• Frequency Characteristics: Low Frequency
• Usage: SVC, DBW
• Frequency: High Frequency
• Size: Medium
• Iron Core Shape: C
• Power Source: Linear Regulated Power Supply
• Application Range: Scientific Research Department
• Trademark: Aoyi
• Origin: Huangshan

Product Description

Product Description

Product Features

What is a Solid State Relay? An SSR, or solid state relay, is an electronic switch that contains no moving parts and that has the same use as an electromechanical relay. 

In an SSR a small control signal controls a larger load current or voltage. Solid state relays consist of:

 

A sensor which responds to a control signal A solid state electronic switching device A coupling mechanism The switching device is used in order to switch power to the load circuitry. The coupling mechanism enables the control signal to activate the switch without any moving parts. 
 

Choosing the Right Solid State Relay:

When you are looking for the right solid state relays, you can filter the results by various attributes with the parametric search:

by Maximum Contact Current (1.1 mA to 500 A), Maximum Isolation Voltage (200 V, 1500 V, 2500 V, 3750 V, 4000 V, 5000 V,…) and Output Voltage (up to 800 V) to name a few. The parametric filters on our website can help refine your search results depending on the required specifications. 

Product Details

SPECIFITION
Load Current	10A,25A,40A,60A,75A,90A
Load Voltage	175-250VAC
Control Mode	voltage regulator control
Control Current	DC3-25mA
On Voltage	≤1.5v
On leakage Current	≤4mA
On-off time	/
Dielectric Strength	2000VAC
Insulation Resistance	500MΩ/500VDC
Ambient Temperature	-20~+70°C
Working Station Indicator	/
Weight	105g

Wiring Diagrams

Notes

1. Resistive load could not exceed 60% of the rated current. 2. Inductive or capacitive load could not exceed 40% of the rated current. 3. Electric machine load could not exceed 20% of the rated current. 4. Proper radiator adapted to the working requirement of solid state relay should be equipped, the allowance should be widened when the load radiating condition is not so good. Short-circuit load is not allowable. 5. Over current protection: over current and short circuit are the main reasons for permanent damage of output controllable silicon in the SSR, and using fast fuse and air switch is one of methods for over current protection, fuse is also available for small capacity. 6. Over voltage protection: It can adopt parallel voltage-dependent resistance(MOV), the MOV area decides the absorption power, while its thickness decides the protective voltage value, generally, 471/10D voltage-dependent resistance for 220V series SSR, 681/10D voltage-dependent resistance for 380V series SSR, 821/10D voltage-dependent resistance for 480V series SSR.  

Factory Introduction

Contact with Us