| Customization: | Available |
|---|---|
| Current Type: | DC |
| Phase: | Three Phase |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Linear phase-shift control, excellent stability, high precision.
Newly design, miniaturized, easy installation and wire connection.
Vacuum welding technology, small power control, good cell compatibility, well heat dissipation.
Imported high-performance SCR chip as controller, ensure 3 phase balance, well symmetrical wave.
Wide working voltage ( lowest input line work voltage can be 4% rated with invariable control accuracy.
Control signal terminal block, European mining detachable terminal block, replacement control loop can avoid re-wiring.
With a variety of control input signal selection,3 phase 3wire circuit.
LED indicator display work condition, Max and Min output adjustable.
Three control signals switchable freely (4-20mA/0-5V/0-10V with 10Kpotentiometer).
Over temperature protection.
|
SPECIFICATION
|
|
|
|
Series Model
|
AYSCR-40ZA (LED display)
|
|
|
Connect Circuit
|
3phase-3Wire or 3phase-4Wire
|
|
|
Rated Voltage
|
3 phase 380VAC , 50/60Hz
|
|
|
Rated Current
|
40A
|
|
|
Output Mode
|
Zero-Cross Output
|
|
|
Output Adjustable
|
BIAS adjust Min. and Max. output
|
|
|
Input Impedance
|
4-20mA(240Ω) ,0-5VDC(30K),0-10VDC(12K)
|
|
|
Auto Control Signal
|
4-20mA/ 0-5VDC/ 0-10VDC (swtichable)
|
|
|
Hand Set Signal
|
2W/10KPotentiometer(0-5VDC only)
|
|
|
Rated Voltage for cooling fans
|
380VAC
|
|
|
over temperature protection
|
stop work when internal temperature > 85
|
|
|
Use Environment
|
temperatute -10~45, humidity < 90%RH , good ventilation
|
|
|
Dimension
|
112 x 135 x 165 (W*L*H)
|
|
|
Installation
|
101 x 95 (W*L)
|
|
Phase Control: Continuity intersection control, output stability, ammeter does not shake, but every peripheral wave will produce harmonics; applicable for fixed/variable impedance load, IR lamp ect ;
Zero Control: assigned zero control, minimum resolution1Hz, does not produce harmonics, output ammeter presents jitter state; applicable for fixed impedance load.
){kind=link}